Télécharger le livre :  Nanoelectronics Fundamentals
Ajouter à ma liste d'envies
This book covers the state of the art in the theoretical framework, computational modeling, and the fabrication and characterization of nanoelectronics devices. It addresses material properties, device physics, circuit analysis, system design, and a range of...

Editeur : Springer
Parution : 2019-11-26
Collection : NanoScience and Technology
PDF, ePub

210,99
Télécharger le livre :  Advances in Control Systems and its Infrastructure
Ajouter à ma liste d'envies
This book gathers selected research papers presented at the International Conference on Power, Control and Communication Infrastructure 2019 (ICPCCI 2019), organized by the Institute of Infrastructure, Technology, Research and Management (IITRAM), Ahmedabad, Gujarat,...

Editeur : Springer
Parution : 2019-11-26

PDF, ePub

147,69
Télécharger le livre :  Novel Finite Element Technologies for Solids and Structures
Ajouter à ma liste d'envies
This book presents new ideas in the framework of novel, finite element discretization schemes for solids and structure, focusing on the mechanical as well as the mathematical background. It also explores the implementation and automation aspects of these...

Editeur : Springer
Parution : 2019-11-26

PDF, ePub

94,94
Télécharger le livre :  Ein reduziertes Modell zur Simulation des transienten thermischen Verhaltens einer Fahrzeugkabine
Ajouter à ma liste d'envies
David Klemm untersucht das transiente thermische Verhalten einer Fahrzeugkabine. Relevante lokale Parameter modelliert der Autor mit dem Ansatz eines linearen, zeitinvarianten Systems und charakterisiert drei Lastfälle durch dreidimensionale transiente CFD-Simulationen....

Editeur : Springer Vieweg
Parution : 2019-11-26

PDF

49,29
Télécharger le livre :  Surface Science
Ajouter à ma liste d'envies
An updated fourth edition of the text that provides an understanding of chemical transformations and the formation of structures at surfaces The revised and enhanced fourth edition of Surface Science covers all the essential techniques and phenomena that are relevant to...

Editeur : Wiley
Parution : 2019-11-26

PDF, ePub

81,99
Télécharger le livre :  Plasticity, Damage and Fracture in Advanced Materials
Ajouter à ma liste d'envies
This book presents studies on the plasticity, failure, and damage behavior of materials and structures under monotonic and cyclic loads. Featuring contributions by leading authors from around the globe, it focuses on the description of new effects observed in...

Editeur : Springer
Parution : 2019-11-26

PDF

94,94
Télécharger le livre :  Autonome Shuttlebusse im ÖPNV
Ajouter à ma liste d'envies
Automatisiertes Fahren wird aktuell auf allen Ebenen diskutiert. Dieses Open Access Buch greift das Thema aus Sicht des ÖPNV auf und stellt Chancen und Risiken des Einsatzes automatisierter Shuttlebusse im Nahverkehr dar. Am Beispiel Bad Birnbach/Niederbayern wird...

Editeur : Springer Vieweg
Parution : 2019-11-26

PDF, ePub

Gratuit
Télécharger le livre :  Cyborg Futures
Ajouter à ma liste d'envies
This volume brings together academics from evolutionary biology, literary theory, robotics, digital culture, anthropology, sociology, and environmental studies to consider the impact of robotics and AI on society. By bringing these perspectives together in one book,...

Editeur : Palgrave Macmillan
Parution : 2019-11-26

PDF, ePub

94,94
Télécharger le livre :  Control and Filtering of Fuzzy Systems with Switched Parameters
Ajouter à ma liste d'envies
This book presents recent advances in control and filter design for Takagi-Sugeno (T-S) fuzzy systems with switched parameters. Thanks to its powerful ability in transforming complicated nonlinear systems into a set of linear subsystems, the T-S fuzzy model has received...

Editeur : Springer
Parution : 2019-11-25

PDF, ePub

94,94
Télécharger le livre :  Abrasive Water Jet Machining of Engineering Materials
Ajouter à ma liste d'envies
This book presents insights in green techniques used in conventional and advanced machining. It consists of various experimental case studies conducted by the authors on green machining of difficult-to-machine materials, polymer and ceramic materials. Effects of green...

Editeur : Springer
Parution : 2019-11-25

PDF, ePub

52,74
Télécharger le livre :  Distributed Heterogeneous Multi Sensor Task Allocation Systems
Ajouter à ma liste d'envies
Today’s real-world problems and applications in sensory systems and target detection require efficient, comprehensive and fault-tolerant multi-sensor allocation. This book presents the theory and applications of novel methods developed for such sophisticated systems. It...

Editeur : Springer
Parution : 2019-11-25

PDF, ePub

94,94
Télécharger le livre :  Introduction to the Variational Formulation in Mechanics
Ajouter à ma liste d'envies
Introduces readers to the fundamentals and applications of variational formulations in mechanics Nearly 40 years in the making, this book provides students with the foundation material of mechanics using a variational tapestry. It is centered around the variational...

Editeur : Wiley
Parution : 2019-11-25

PDF, ePub

128,99
Télécharger le livre :  DIY MEMS
Ajouter à ma liste d'envies
This book describes the future of microscopically small medical devices and how to locate a lab to start conducting your own do-it-yourself microelectromechanical systems (MEMS) research in one of the many national, international, government, and other regional open use...

Editeur : Springer
Parution : 2019-11-25

PDF, ePub

52,74
Télécharger le livre :  Channel Aggregation and Fragmentation for Traffic Flows
Ajouter à ma liste d'envies
This book introduces the impact of channel aggregation (CA) and channel fragmentation (CF) on traffic flows, through analytical models, computer simulations, and test-bed implementations. Its content includes the concept of CA and CF, the basic concept and calculation...

Editeur : Springer
Parution : 2019-11-25

PDF, ePub

52,74
Télécharger le livre :  Production at the leading edge of technology
Ajouter à ma liste d'envies
The focus of the Congress will be leading-edge manufacturing processes. Topics include manufacturing at extreme speed, size, accuracy, methodology, use of resources, interdisciplinarity and more. Contributions from production and industrial engineering are welcome....

Editeur : Springer Vieweg
Parution : 2019-11-23

PDF

210,99
Télécharger le livre :  Carbon Management in Tropical and Sub-Tropical Terrestrial Systems
Ajouter à ma liste d'envies
Soil organic carbon (SOC), a key component of the global carbon (C) pool, plays an important role in C cycling, regulating climate, water supplies and biodiversity, and therefore in providing the ecosystem services that are essential to human well-being. Most...

Editeur : Springer
Parution : 2019-11-23

PDF, ePub

94,94
Télécharger le livre :  Advances in Forming, Machining and Automation
Ajouter à ma liste d'envies
This volume comprises select proceedings of the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers in this volume focus on forming and machining, and discuss both conventional technologies and the...

Editeur : Springer
Parution : 2019-11-23

PDF, ePub

210,99
Télécharger le livre :  ISGW 2018 Compendium of Technical Papers
Ajouter à ma liste d'envies
This book presents selected articles from India Smart Grid Week (ISGW 2018), held on March 5 to 9, 2018, at the Manekshaw Centre, New Delhi, India. It was the fourth conference and exhibition on smart grids and smart cities organized by the India Smart Grid Forum...

Editeur : Springer
Parution : 2019-11-23

PDF, ePub

105,49
Télécharger le livre :  Fahrwerk
Ajouter à ma liste d'envies
In diesem Buch lernt der Leser die wesentlichen Unterschiede zum Pkw durch die nach Baugruppen aufgeteilte Analyse kennen. So erhält er das Rüstzeug, die erworbenen detaillierten Kenntnisse in die Konstruktion und Entwicklung von Wettbewerbsfahrzeugen...

Editeur : Springer Vieweg
Parution : 2019-11-23

PDF, ePub

94,94
Télécharger le livre :  Channel Modeling in 5G Wireless Communication Systems
Ajouter à ma liste d'envies
This book addresses the fundamental design and technical challenges for fifth generation (5G) wireless channel models, including multi-frequency bands and multi-scenarios. The book presents a strong vision for 5G wireless communication...

Editeur : Springer
Parution : 2019-11-22

PDF, ePub

68,56
<< < 633634635636637 >